Must watch Brakes Getting Hot After New Pads viral

Brakes Getting Hot After New Pads? Here’s Why and How to Fix It

You’ve just installed a fresh set of brake pads, but for some reason, your brakes are still getting hot. What’s going on? In this blog post, we’ll explore some of the possible causes of this problem and how to fix it.

Causes of Brakes Getting Hot After New Pads

There are a few different reasons why your brakes might be getting hot after new pads are installed.

1. Air in the brake lines: When you install new brake pads, it’s important to bleed the brake lines to remove any air that may have gotten trapped inside. If there is air in the lines, it can cause the brakes to drag and overheat.
2. Worn or damaged calipers: The calipers are the components that squeeze the brake pads against the rotors. If the calipers are worn or damaged, they may not be able to apply enough pressure to the pads, which can cause them to overheat.
3. Glazed rotors: The rotors are the discs that the brake pads rub against. If the rotors are glazed, it means that they have become smooth and shiny. This can reduce the friction between the pads and rotors, which can lead to overheating.
4. Seized brake pads: Brake pads can seize if they are not properly lubricated. When brake pads seize, they can drag on the rotors, which can cause them to overheat.

How to Fix Brakes Getting Hot After New Pads

If you’re experiencing brakes getting hot after new pads, there are a few things you can do to fix the problem.

1. Bleed the brake lines: Bleeding the brake lines is a relatively simple procedure that can be done at home. It’s important to follow the manufacturer’s instructions carefully when bleeding the brake lines.
2. Inspect the calipers: If you suspect that the calipers are worn or damaged, you should have them inspected by a qualified mechanic.
3. Replace the rotors: If the rotors are glazed, they should be replaced. Replacing the rotors is a more involved procedure than bleeding the brake lines, but it’s necessary to ensure that your brakes are functioning properly.
4. Lubricate the brake pads: Before installing new brake pads, it’s important to lubricate them with a high-temperature brake grease. This will help to prevent the pads from seizing.

Conclusion

If you’re experiencing brakes getting hot after new pads, it’s important to troubleshoot the problem and fix it as soon as possible. Hot brakes can be dangerous and can lead to a loss of braking power. By following the tips in this blog post, you can help to fix the problem and keep your brakes working properly.